12 Types of Garment Samples You Should Know About for Apparel Production

Even though, in essence, apparel production is not a very complicated process, there are stages we need to see through carefully before garments can be sent out for production successfully. Each and every one of these steps comes with a fair share of sample making, testing, and adjusting.

There are several ways to go about garment sampling and it’s important to know and understand the different kinds that exist to see which ones work best for your production needs.


Three stages of garment sampling


When creating samples with your factories, there are usually three stages. The first set of samples correspond to the design phase, which includes everything from the initial design to pattern making. The second sample set is part of the evaluation phase which is for finalizing garment fit, predict costings, order quantities, etc.

Finally, after the collection is approved and sent to production, you will need to check samples again to ensure quality and consistency of the entire batch. These samples correspond to the quality control phase. If not all, most of these samples are essential to guarantee a top product that will not only satisfy your customers but will help make its way in today’s highly competitive market. Here we’ve rounded everything you need to know to achieve sampling success!


Ultimate Guide to Clothing Manufacturing
In this blog post, we walk you through the process of garment production and collaboration between designers and factories.
Get a full insight on clothing manufacturing process in this guide

Types of garment samples


Mock-up


The muslin sample is the first interpretation of a designer’s idea. Sometimes, the idea might not translate as well on paper as it does on fabric and this is where mock-up plays a crucial role. It doesn’t require any trims and its sole purpose is to test whether the garment is viable or not. Not all designs require a mock-up, so not every designer or factory works with these type of samples.

Muslin garment sample

Proto or development sample


The proto sample kickstarts the whole production cycle. Factories follow either the original sketch or a tech pack provided by the designer. The idea is to solely review the style and design aesthetics, so it doesn’t need to be constructed adhering to the full specifications.

Sewing a proto sample

Any fabric and trim with similar weight can be used depending on its availability. Generally, three proto samples are made: two for the brand/designer's reference and one for the factory’s reference.


Digital garment sample


A digital sample is a software rendering of the garment in a 3D form which allows the visualization of fit and fall of the garment in both stillness and movement.

3D garment sample

However, a complexed learning curve and high implementation cost can be the limiting factors of this technology. But if brands could overcome that, 3D can significantly cut down on sample making cost and approval time between the designers and factories.


Fit sample

As the name suggests, fit samples are to ensure the adequate fit and fall of the garments and they’re made in accordance with the sizing requested by the brand. Measurements and construction need to be accurate and correct in order to pass the fit evaluation. The fit sample can be made of a similar fabric as the one intended for the final design, and many adjustments could be necessary before the desired fit is achieved.

Constructing a garment fit sample

At this stage, you are only required to add specs for the sample size in your tech pack.


Size set sample


After the fit sample has been approved, the base pattern for each size need to be graded, so samples could be created for the entire size range. Size set sampling includes three samples of each size which are made with the fabric and finishings intended for the final product. After this is complete, mass production can start once the brand gives their approval to the factories.

Graded pattern

Add exact specs of your entire size-range in your tech packs.


Salesman sample


As the name suggests, the salesman samples or SMS are the samples that are used for marketing and promotions of the product range. They are made with the final fabrics and final touches in the approved basic sizes. These are generally put on display in retail stores or exhibited at trade shows to get orders from respective retail channels.

Salesman samples at showroom

GPT sample


GPT sample refers to the production sample that is given for "Garment Performance Test". These samples are used for a series of tests that a brand would like to evaluate before running the styles for production. The tests can include seam strength, seam slippage, colorfastness, wash fastness, among others.

Garment performance test

Pre-production sample


A pre-production sample is the first sample made in the actual production line of the factory. It’s constructed with the actual fabrics intended for the design and trims with all the order specification regarding measurements, embroidery, and washes. It’s a test run by the factory and they can proceed with the bulk production only when the PP sample is approved by the brand.

Pre-production sample

Sealed sample


Once the PP sample is approved by the brand, they are sealed to prevent tampering from the factory and now become the standard for bulk production. They are also known as gold-seal samples or red-seal samples, depending on the approval, or disapproval of the brand.

Sealed sample

TOP (Top of production) sample


After the approval of the PP sample, which signals the start of production, the Quality Control inspector representing a brand can visit the factory at any time and pick a garment from the production line for inspection. These samples are called "Top of production or TOP samples" and they are evaluated to ensure that the bulk production is of the same quality as the PP sample. TOP samples are also checked for their packaging.

Top of production sample

Shipment sample


Once the bulk production is done and the shipment is finished, packed, and ready to go, a few samples are kept aside by the factory as shipment samples. These serve as to test the final product that will reach the brand; right from the folding to the packaging. Many brands will only approve shipping if the samples pass this test.

Shipment sample

Press samples


Press samples are exact replicas of the final sellable product, usually in a model's sample size. They’re used for photographing promotional material like collection campaigns for advertising, look books, e-commerce and can be loaned to magazines for editorial photo shoots.

Press sample

Share
Twitter icon Twitter Facebook icon Facebook Pinterest icon Pinterest LinkedIn icon Linkedin
Co-founder & CMO at Techpacker
/
New York
More posts by Sayam kochar.